Rick_CT70K1
New Member
Well I have been fortunate to not hit too many snags on my K1 rebuild. It has the Lifan 70cc motor and also the 12volt back to 6 volt converter harness. Hindsight I would have just converted to 12volt but that ship has sailed.
Now to my issue, the headlight switch when it is on L position no light is on, but when I put to H it shines brightly and the tail light comes on. When I use my brake the brake light does not light up.
I haven't gotten around to troubleshooting either yet, but figured I'd post in case anyone had any good ideas for what I'm doing wrong or what may be wired wrong.
When the bike is operating/engine running the headlight isn't on nor the taillight unless i turn to High beam switch.
I'd attach a pic with the light on but thats further back in the build so here's a semi completed picture, crooked sticker and all
https://drive.google.com/file/d/1eoGNLGjDP9-R3p2iMfCOFT_p1r6aJmb8/view?usp=sharing
Thanks,
Rick
Now to my issue, the headlight switch when it is on L position no light is on, but when I put to H it shines brightly and the tail light comes on. When I use my brake the brake light does not light up.
I haven't gotten around to troubleshooting either yet, but figured I'd post in case anyone had any good ideas for what I'm doing wrong or what may be wired wrong.
When the bike is operating/engine running the headlight isn't on nor the taillight unless i turn to High beam switch.
I'd attach a pic with the light on but thats further back in the build so here's a semi completed picture, crooked sticker and all
https://drive.google.com/file/d/1eoGNLGjDP9-R3p2iMfCOFT_p1r6aJmb8/view?usp=sharing
Thanks,
Rick