Too much crap
- Thread starter kirrbby
- Start date
kirrbby
Well-Known Member
A few questions.
Are these parts to go on your CT70 K1 frame/bike??
Do you want a plastic tank with the bracket, gasket etc?? or a metal tank with the extra bits?? tank only?
Wheels and hubs...I imagine you need all of the hardware and brake plates..?
Do you want cheap and rusty? or, nice but expensive?
Ozpall
Member
i have a 72 ct70 frame bare, so trying to build it cheap, cheaper tank and cap alone, complete wheels and hardware please. cheap and rusty i got a blaster at home so i can clean up.
thank you
Ozpall
Member
kirrbby
Well-Known Member
I had the hubs and brake plates here, but no rims. So today I stopped at storage to look for parts for you and bcuda. I brought home 3 wheels that I'll have to break down. Then I'll pick a couple rims for you.
I'll post pics when I get it together. Maybe today or tomorrow.
It's a good hot day in Davison for prying wheels apart. I'm hoping I'll get lucky.
Where are you located Ozpall?
kirrbby
Well-Known Member
If youre planning to buy new rims I won't break these down. But im happy to do it if you want the used ones...let me know..??
You should get a front hub and brake parts with your new front end. Do you still want the one I have here, or do you just want the rear??
I'll look up a brake pedal. Do you still need a tank??
Last edited:
kirrbby
Well-Known Member
bcuda I'm very sorry, but I do not have a tank for you. I must have sold it, or I lost it good. I've looked everywhere that I can think to look.
I'll keep a eye open on eBay. I'll let you know if I spot a good one.
Is your phone # still the same? Can I send you a text? Or call?
Ozpall
Member
ok so i need then, tank with the mounting plate, rear hub w brake assembly, rear brake pedal.
thank you again
kirrbby
Well-Known Member
Ok ozpall, cheap and crappy.
This is a good tank from a K0. It will work well in your bike but the metal mount is not correct for a k1. And you'll have to buy a cap.
Brake lever is bent, and I don't know how badly. It's cheap if you want it, and its all I have to offer.
One of these is bent. The other has really worn and rusty foot pegs. Your choice with a workable KS.
This hub looks like someone tried some sort of rubber...liquid rubber...or putty...or something to replace the rubber dampeners. Didn't work. It's gonna take some time to clean it out of there. Otherwise it's all good parts...I'm sure the bearings are junk.
I'll pm prices a little later.
This is a good tank from a K0. It will work well in your bike but the metal mount is not correct for a k1. And you'll have to buy a cap.
Brake lever is bent, and I don't know how badly. It's cheap if you want it, and its all I have to offer.
One of these is bent. The other has really worn and rusty foot pegs. Your choice with a workable KS.
This hub looks like someone tried some sort of rubber...liquid rubber...or putty...or something to replace the rubber dampeners. Didn't work. It's gonna take some time to clean it out of there. Otherwise it's all good parts...I'm sure the bearings are junk.
I'll pm prices a little later.
kirrbby
Well-Known Member
I'll bet that you're talking about a K2 Z50, but I have to ask...are these parts for a Z50 or a CT70?
yes your right, its for a Z50. sorry about that
kirrbby
Well-Known Member
Those a most of the same parts that everyone needs for their K2 Z50'S. Along with rear fenders and brake pedals.
The only bars I have are bent and probably rusty too.
I don't have much of the other stuff, and what I DO have would probably be expensive.
What are you workin on? Are you looking for cheap and rusty, or nice but expensive. I don't think I have much of anything in-between.
The only bars I have are bent and probably rusty too.
I don't have much of the other stuff, and what I DO have would probably be expensive.
What are you workin on? Are you looking for cheap and rusty, or nice but expensive. I don't think I have much of anything in-between.
Im looking for cheap as opposed to expensive, parts with some rust are fine. I would like to restore the bike and keep most of the parts OEM.
The bike that I have is pretty much all there, just missing a few of those big items. Because the bike has good bones and the engine runs great, I'm mainly doing a lot of clean up of the parts, removing rust, polishing, etc. I recently stripped the frame and plan on repainting the bike.
It looks like I was able to track down a headlight today but I'm still searching for bars, tail light assembly, and a rear fender.
The bike that I have is pretty much all there, just missing a few of those big items. Because the bike has good bones and the engine runs great, I'm mainly doing a lot of clean up of the parts, removing rust, polishing, etc. I recently stripped the frame and plan on repainting the bike.
It looks like I was able to track down a headlight today but I'm still searching for bars, tail light assembly, and a rear fender.
Last edited: