42653steve
Member
Can anyone tell me the difference in stator parts for the two different flywheels on a 1971 CT70H? Thanks
ThanksI dunno exactly what you mean. There aren't any specs, other than impedence values and those are the same for all 6v stators.
Suffice it to say that no Hitachi parts interchange with Mitsubishi.
ThanksI think every single thing is different except for the points.
Mitsubishi parts, OR, Hitachi parts. It's one or the other, nothing interchanges except points.
ThanksI think every single thing is different except for the points.
Mitsubishi parts, OR, Hitachi parts. It's one or the other, nothing interchanges except points.
ThanksThe coils and stator plate are different. Flywheels too, Im pretty sure.
Thanks that’s what I have found and parts are hard to find and not cheap.I think every single thing is different except for the points.
Mitsubishi parts, OR, Hitachi parts. It's one or the other, nothing interchanges except points.
I have always wondered too. I'd like to see them side by side. I do have a S65,CTH and a CT but I hate to take them apart
ThanksI have one of each and will post some pics in the next few days. X2 on previous posts; other than points, o-rings for the stator plate, mounting screws, nothing is the same or interchangeable. Even the mounting mounting holes for primary and lighting coils are not the same as a Hitachi. By this, I mean you can't even mount Hitachi coils on a Mitsu stator plate and vice versa. The ID of the Hitachi Flywheel is 84.65mm vs, 86mm for the Mitsubishi.
However, both work just fine when paired with their respective flywheel.
ThanksTo throw another wrench in the works an S65 setup will work on an H too I believe but they are Denso. I'll have to dig one out
ThanksI have one of each and will post some pics in the next few days. X2 on previous posts; other than points, o-rings for the stator plate, mounting screws, nothing is the same or interchangeable. Even the mounting mounting holes for primary and lighting coils are not the same as a Hitachi. By this, I mean you can't even mount Hitachi coils on a Mitsu stator plate and vice versa. The ID of the Hitachi Flywheel is 84.65mm vs, 86mm for the Mitsubishi.
However, both work just fine when paired with their respective flywheel.
ThanksI have one of each and will post some pics in the next few days. X2 on previous posts; other than points, o-rings for the stator plate, mounting screws, nothing is the same or interchangeable. Even the mounting mounting holes for primary and lighting coils are not the same as a Hitachi. By this, I mean you can't even mount Hitachi coils on a Mitsu stator plate and vice versa. The ID of the Hitachi Flywheel is 84.65mm vs, 86mm for the Mitsubishi.
However, both work just fine when paired with their respective flywheel.
I have parts just got to figure out which parts are bad. Had bike running and just lost spark. What’s best way to check stator parts? ThanksI have a lot of used parts. allenp42 is really good at repairing them, and he may have parts too. What exactly do you need?? What exactly do you have right now.