Too much crap

kirrbby

kirrbby

Well-Known Member
I'm guessing these must be harder to find than K1 ears. These are straight.
ja7abeda.jpgdybydy2y.jpg

2
 
Last edited by a moderator:
mips

mips

Member
Kirb, have you any z50 hard tail hubs, ct70 fork top bridges, or wheels. Bought a lot of bikes a
And stupidly gave away or sold cheaply all my spare ct70 stuff.
 
kirrbby

kirrbby

Well-Known Member
MIPS, I do have those parts. Rear z hubs in good condition are kinda scarce but I have some that looks good so far but I haven't checked it over yet. The sprocket bolt holes is the common pronlem. Ct wheels or z50? K0 top bridge or K1. Let me know specificly what you need and how many of each and I'll see what I can do. My daughter gets married tomorrow and my own anniversary is Tuesday. But I'll get to it when I can.
 
mips

mips

Member
Looking for ct70 wheels. they can need blasted, just have about four bikes w/o wheels. No worries, best of luck at the wedding. Congrats!
 
kirrbby

kirrbby

Well-Known Member
I have z50 wheels with mostly worn out old crispy tires, may have some that are decent. Tomorrow or Thursday I'll check it out, I'll also peel some 70 wheels apart to come up with rims. The wife and I plan to start listing crap on eBay soon. Hopefully a LOT of crap.
 
kirrbby

kirrbby

Well-Known Member
Sorry, no 80's bikes at all and I don't usually give anything away. I actually prefer a trade, parts for green money ;)
 
kirrbby

kirrbby

Well-Known Member
u9aja3a8.jpgy6uhy2ar.jpg6y3a7uzy.jpgdu8e8udu.jpgu3usu2ev.jpgy5y8ydab.jpg






The sides with the valve hole are all on top. They are numbered in order of best to worst, IMO, after a quick look. mips has first dibs, make an offer or tell me what you want and I'll make you one.

2
 
Last edited by a moderator:
kirrbby

kirrbby

Well-Known Member
I don't know why my pics end up spinning and out of order, missing etc, hopefully you can figure them out.
basy9y7a.jpgyqyhurav.jpg

2
 
Last edited by a moderator:
kirrbby

kirrbby

Well-Known Member
Titled H this bike has a problem with first gear so I'm swapping in a motor that I bought as "rebuilt" I have gone through the motor except the lower end and hope to have it in and running tomorrow. It will then go to eBay. The frame and motor #'s are only 1 digit apart. The motor has a weld repair that you may want to clean up a little better. Frame has a couple dent/scrapes on the left side. $1200 firm here on LH.

sejujaje.jpg7ebu8ame.jpgejahatus.jpg4y4e8ury.jpga7u5u6e9.jpg


2
 
Last edited by a moderator:
kirrbby

kirrbby

Well-Known Member
No title make a offer if interested. This is headed for eBay too. Silver tag.
hepugaby.jpgena4u8e8.jpg

2
 
Last edited by a moderator:
Top