Search results

Just got my K0 frame/tank decals for my clone and was wondering if someone could tell me, or point to a tread for proper placement for them. Thanks.

Looking to get frame decals for my CT70 clone and want the K0 Honda and "triangle" decals for the frame. Saw a few on ebag, but didn't know what might be the best bang for the buck. As far as the triangle decal, I saw some that said "aluminum like" and a few that said " aluminum". Has anyone...

I just picked up a TaoTao CT70 Clone that has the little 3.50-10 tires and I'm going to put on 120/90-10's. Can I use the tubes that came out of the 3.50 tires, or should I get bigger ones?

Pretty fired up! Just won this auction on ebay. Already have new tires and a good CT70 front fender to switch out on it. Driving 5 hours round trip tomorrow and I can't wait...

Theres a Dealership that has a new TaoTao 125 for $1195, but they said that it does not come with a title, only a bill of sale. How hard is it to get these licensed w/o a title? BTW, I'm in Indiana.

I know there's forums for Clones, but figured I'd get a quicker response here. Found a Dealership with a new Tao Tao 125cc on a CT70 clone frame. I think they've had it for a few yearsa and with 0 miles. Are these the same as Lifan's, or a lower quality? Really thinking about buying it, but want...

I bought this exhaust off ebay and was pretty happy with it. Problem is my skid plate hits the bottom of the exhaust at the bend. It appears that this pipe drops about an inch lower than the original. Has anyone here made modifications to make it fit, and if so, what did you do?

I have what I believe is a K3 CT70, S/N 2312224. Build date is 10/73. Anyway, I bought a new ignition switch and wiring harness from Dratv. Plugged in everthing and it started first kick, but several minutes later I noticed the rectifer (i think, the small two pronged chip) was very hot. I...

Looking for a good running engine to fit my '79 CT70. I already have a carb and intake. I don't know much about these, but have been told pre-'77 engine won't work. Please PM or email me at jimsweeneyindy@comcast.net.

I have a '79 ignition switch, and was hoping to install it in my K2. I was looking on dratv's site and noticed the years don't overlap, but would it still work? I didn't look close but the matchup's on the wiring diagrams looked similar will the the ignition switch.... Anybody know? Thanks!

Ok. I have a K2 I jst bought, and the wiring harness id FUBAR. The harness going to the engine is actually cut off from the rest of the harness. I thought I saw a thread that said all you need to do to start the engine is hook up a wire to the coil. Is this true, and can someone tell me what I...

Getting ready to take my frame to the Powder Coater and was looking at the ignition switch hole and noticed something looked odd. It mic'd out at about 1.18" and my other frame mic'd at about .985". It had an ignition switch with a plastic ring around it. Do other ignitions work with a K0 or any...

It's the lower race on the triple tree? I'm powder coating and it looks like there's a thin rubber shim below it. I've struck out on my luck...

I don't know much about Z50's, but I think this seat is off of one. Can someone confirm this and/or tell me the year and model? Thanks

Watching History Channel tonight and they had a preview for Pawn Stars on this Monday. They go to some guys house to buy his collection of "mini-bikes". I notice one, maybe two CT70's and I think a Z50. I love that show, and this one I am really looking forward to. Looks like it will be a good...

CT70-aholic. :20: Bought a 1970 K0 last fall, and in my search for parts, I've also bought a '73 and a '79 CT70. And that's not including the '79 frame I bought for the front forks a few weeks ago.... I was cured of multy Mopar fever a few years ago, but that was easy. Lack of storage space...

I need to replace the wiring harness on my 1970 CT70, but I'm thinking about getting a Lifan 88cc engine in about a year. Can I just buy a K0 wiring harness now and make changes later, or am I better off buying a newer style harness now?

Anyone know what's the pad thickness on new Brake shoes? Just wondering how worn down mine are. My caliper measured it at .092" thickness on my front brake.

I'd like to install tha wider Kenda 761 tire on my CT70KO, but was told that the tire will not fit between the forks. What all is needed to install the newer fork assy, and do I need the 72 up front wheel assy? Thanks.

Hello Everyone. I picked up a 70 CT70 a few months ago. Needs a lot of work, but runs. I've restored cars in the past, so I'm not too worried about brining it back to respectability. I wanted this, because I had one as a kid and always wanted another. Should be fun buzzing around the...